oil filter RENAULT CLIO 1997 X57 / 1.G Petrol Engines Workshop Manual
Page 22 of 55
ENGINE AND PERIPHERALS
Standard exchan
ge10
PREPARATION OF USED ENGINE FOR RETURN
The engine should be cleaned and drained (oil
and water
).
Leave on the used engine or put into the box use
d
for returning it:
- the dipstick and its guide,
- the flywheel or the starter plate,
- the clutch disc and mechanism,
- the fuel pump,
- the water pump,
- the crankshaft pulley,
- the cylinder head cover,
- the spark plugs,
- the belt tensioner,
- the pressure switch and temperature switch,
- the timing cover,
- the oil filter.
Do not forget to remove:
- all the flexible coolant pipes,
- the belt or belts (except timing belt).
The used engine must be fixed on to the wooden
base in the same way as the reconditioned en-
gine:
- plastic plugs and caps in place,
- cardboard cover all around it.
10-20
Page 1 of 1 E_Series_22
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_22.htm
Page 25 of 55
97160-1S1
FigurineMethod
referencePart
NumberDescription
ENGINE AND PERIPHERALS
S
pecial tooling required10
96508S1
Mot. 133000 00 133 000 Oil filter cap, 66 mm diameter
Mot. 127300 00 127 300 Tool for checking belt tension
Mot. 133500 00 133 500Pliers for removing valve stem seals
98503S
10-23
Page 1 of 1 E_Series_25
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_25.htm